All copyrights for image and content belongs to kartkadopolski.blogspot.com
I not agree to copy and distribute image and content without my permission. If you have any question please contact me at email.

307. Easel card with Peonies

Hello everyone!
For this week Heartfelt Creations inspiration I design two projects.
This is the first one - 6" x 6" easel card made with
Window Scenes Paper Collection  
and
Decorative Royale Square & Circle Dies




Instructions:  
Easel card measures - 6 inches by 6 inches. To create the card base, take 6” x 6” Round Bi-fold Card and score it at 9” (long side up), then fold it using a bone folder along the score lines. Die cut three circles of Rounded Sunlight Window Die from Window Scenes Paper Collection, then cut one of the circles in half and adjust it to match scored circle on the card base. Adhere all the pieces to the card base. Apply glue to the scored half circle part of the base and adhere it to the back of the card front. Using Rounded Lattice Window Die (eyelet half circle) and Rounded Eyelet Window Die (decorative panel) die cut decorative element from Luxe Gold Card, then adhere it to the piece of Window Scenes Paper Collection and cut out the excess pieces with scissors. Add an additional layer of white card on the back and adhere final piece to the card front using 3D foam. Cut out a strip with sentiment from Sweet Peony Paper Collection, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam.
Stamp leaf images of Wild Aster Cling Stamp Set with Mowed Lawn Distress Ink, then color them in with the same ink (Mowed Lawn Distress Ink) using daubers. Die cut the leaves using matching die, then apply Designer Dries Clear Adhesive on the top with sponge and sprinkle them with Rajni Chawla’s Crystal Clear Glitter.
Stamp flower images from Large Sweet Peony Cling Stamp Set with Vermillion Archival Ink and colour them in with Ranger Archival Inks - Vermillion and Vibrant Fuchsia using sponge daubers. Die cut flowers using matching die from Large Sweet Peony Die, then shape them using Deluxe Flower Shaping Kit and assemble flowers using a hot glue gun. Use a paper piercer to make a hole in the middle of flowers and pull some stamens through. Add a bit of hot glue underneath the flower to secure the stamens. Using a sponge, add Designer Dries Clear Adhesive to the flower petals and sprinkle them with Rajni Chawla’s Crystal Clear Glitter. Using hot glue gun adhere little bit of white sisal and flowers to the card front, then fill in composition with leaves.
Die cut two outer pieces of Window Hinges Die of White Card, stack and adhere them together and then adhere the final piece inside the card base as shown using 3D foam. Die cut matching decorative piece of Window Hinges Die from Luxe Gold Card and adhere it to the white piece inside the card.
As a final touch, apply Enamel Shapes to decorate card front as you desire.
 
Products Used:
 
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Double Dots 100pc. -3D Foam Circles, DDOTS
6" x 6" Round Bi-Fold Card - White, HCCB1-481
Large Sweet Peony Die, HCD1-7174
Wild Aster Die, HCD1-7257
Rounded Sunlight Window Die, HCD1-7272
Rounded Eyelet Window Die, HCD1-7273
Rounded Lattice Window Die, HCD1-7274
Window Hinges Die, HCD1-7285
Stack and Store Daubers-Pack of 6, HCDA1-449
Window Scenes Paper Collection, HCDP1-2109
Sweet Peony Paper Collection, HCDP1-288
Luxe Gold Cardstock, HCGP1-488
Large Sweet Peony Cling Stamp Set, HCPC-3820
Wild Aster Cling Stamp Set, HCPC-3887
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Bridal Bouquet Stamens-Small, HCS1-460


Deluxe Flower Shaping Kit HCST1-401
Rajni Chawla's Crystal Clear PGM15015
Ranger Archival Ink Pad - Vermillion RACP461
Ranger Archival Ink Pad - Vibrant Fuchsia RACP524
Hydra Sponges RLHS100   

Other Products: 
Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, White Cardstock, White sisal, Enamel shapes, Ranger Distress Ink - Mowed Lawn


I hope you like my inspiration
For printable instructions to recreate this project visit Heartfelt Creations blog
Check out newest ideas on Heartfelt Creations Official Facebook Page
and
come back for more

Katarzyna Ewa

303. Mother's Day card with Hydrangea

Hello everyone!
For this week Heartfelt Creations inspiration I design 6"x 6" Mother's Day card
with
new Cottage Garden Collection

photo (c) Heartfelt Creations
Instructions:
Card measures - 6 inches by 6 inches. Cut out three 6” x 6” pieces of Cottage Garden Paper Collection and adhere them to the Swing Card base. Die cut two large circles of Paper Collection using Rounded Window Frame Die, then Stock the circles together, place intricate die of Rounded Eyelet Window Die on top and run it through Die Cutting Machine. Adhere one of the circles to the card front, then place the same intricate die on the top and run it through Die Cutting Machine. Adhere second circle to the back part of the card front.
Die cut photos using 2 3/4” x 3 3/4” Eyelet Rectangle & Basics Die and adhere them inside of the card. Stamp the hydrangea image of Cottage Window & Hydrangea Cling Stamp Set with Faded Jeans Distress Ink on the flowers and Mowed Lawn Distress Ink on the stem and leaves. Colour them with Distress Inks: Mowed Lawn, Faded Jeans and Shaded Lilac using Blender Marker and Daubers. Die cut the hydrangea image with matching die of Cottage Window & Hydrangea Die, then adhere them on the bottom each of the photo.
Stamp large hydrangea image of Cottage Garden Hydrangea Cling Stamp Set with Cobalt Archival Ink on the flowers and Mowed Lawn Distress Ink on the stem and leaves. Colour the flower with Manganese Blue and Vivid Chartreuse Archival Inks using Daubers, then colour the stem and leaves with Mowed Lawn Distress Ink using Blender Marker. Die cut large hydrangea with matching die of Cottage Garden Hydrangea Die, then adhere additional layer of white cardstock to the back and Adhere final piece to the card front as shown. Stamp two large hydrangeas of Cottage Garden Hydrangea Cling Stamp Set with Cobalt Archival Ink and cut two smaller pieces using scissors. Adhere them to the large hydrangea on the card front using 3D Foam Circles. Stamp hydrangea flowers of Cottage Garden Hydrangea Cling Stamp Set with Cobalt Archival Ink and colour them in with Manganese Blue and Vivid Chartreuse Archival Inks using Daubers. Die cut hydrangea flowers with matching die from Cottage Garden Hydrangea Die, then place them in 3D Hydrangea Shaping Mold, spray them with water and run them through die cutting machine. Adhere hydrangea flowers to the card base using hot glue gun. To add more dimension, adhere some of the hydrangea flowers using 3D Foam Circles. Using a sponge add Designer Dries Clear Adhesive to the flower petals and sprinkle them with Rajni Chawla’s Crystal Clear Glitter, then apply Navy Blue Nuvo Crystal Drops to the center of each hydrangea flower.
Die cut the sentiment from Paper Collection using Eyelet Circle & Basics Small Die. Add an additional layer of white card on the back and adhere final piece to the card front as shown.

Other Products: 
 Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, Craft cardstock, Agateria ‘Album’ laser cut chipboard piece, Ranger Distress Ink pads - Pumice Stone, Scattered Straw, Mowed Lawn; Ranger Archival Ink - Chrome Yellow


I hope you like my inspiration
For printable instructions to recreate this project visit Heartfelt Creations blog
Check out newest ideas on Heartfelt Creations Official Facebook Page
and
come back for more

Katarzyna Ewa

305. 5 " x 7" tent card

Hello everyone!
For this week Heartfelt Creations inspiration I design 5"x 7" tent card
with
Wild Aster Collection






Instructions:  
Tent card measures - 5 inches by 7 inches. To create 5” x 7” card base - cut out a 10” x 7” piece of craft cardstock and score it at 5” (long side up), then cut out 2 1/2” x 7” piece of craft cardstock and score it at 1/4”, 1 1/4” and 2 1/4” (short side up). Fold using bone folder along the score lines. Adhere both parts together as shown to create tent card base. Cut out two 4 7/8” x 6 7/8” pieces of pattern paper from Wild Aster Collection and adhere it to the card front and back as shown. Die cut a frame of Luxe Gold Cardstock with Intricate Swirl Frames Die and adhere additional layer of white cardstock to the back, then adhere final piece to the card front using Darice Adhesive Foam Strips. Die cut two intricate frames one of white and second of Luxe Gold Cardstock. Adhere the white intricate frame on the card front and gold Intricate frame on the card back, then fill in the gold intricate frame with white die cut piece.
Stamp the scroll image of Wild Aster Scroll & Cluster Cling Stamp Set with Seedless Preserves Distress Ink and colour with Ranger Distress Inks - Barn Door, Peeled Paint and Seedless Preserves using Blender Marker and Daubers. Die cut the scroll with matching die of Wild Aster Scroll & Cluster Die, then adhere additional layer of white cardstock to the back and distress the edges with Seedless Preserves Distress Ink. Using metal tip add Designer Dries Clear Adhesive to the flowers and sprinkle them with Rajni Chawla’s Crystal Clear Glitter and leave it to dry completely. Adhere final piece to the card back as shown using 3D Foam Circles.
Stamp the plant image of Wild Aster Spray Cling Stamp Set with both Seedless Preserves Distress Ink and Peeled Paint Distress Ink. Colour with Ranger Distress Inks - Barn Door, Peeled Paint and Seedless Preserves using Blender Marker and Daubers. Die cut the plant with matching die of Wild Aster Spray Die, then adhere additional layer of white cardstock to the back. Using a sponge add Designer Dries Clear Adhesive to the flowers and sprinkle them with Rajni Chawla’s Crystal Clear Glitter, then leave them to dry completely. Adhere final piece to the card front as shown.
Stamp flower images of Wild Aster Cling Stamp Set with Vermillion Ranger Archival Ink and colour them in with Ranger Archival Inks: Vermillion, Buttercup and Vibrant Fuchsia using Daubers. Die cut the flowers with matching die of Wild Aster Die, then shape them using Deluxe Flower Shaping Kit and assemble flowers using a hot glue gun. Using a sponge add Designer Dries Clear Adhesive to the flower petals and sprinkle them with Rajni Chawla’s Crystal Clear Glitter. Leave the flowers to dry completely. Apply Designer Dries Clear Adhesive on the center of each flower and sprinkle them with Gilt Trip Prills. Leave the flowers to dry and then adhere them to the card front as shown.
 
Products Used:
Designer Dries Clear Adhesive, 159723
Tombow Dual Brush Marker N00 Blender, 282873
Metal Tip for Adhesive Bottles, 352854
Gilt Trip Prills, ANC805
Darice Adhesive Foam Strips, D120601
Double Dots 100pc. -3D Foam Circles, DDOTS
Wild Aster Die, HCD1-7257
Wild Aster Spray Die, HCD1-7258
Wild Aster Scroll & Cluster Die, HCD1-7259
Intricate Swirl Frames Die, HCD2-7191
Stack and Store Daubers-Pack of 6, HCDA1-449
Wild Aster Paper Collection, HCDP1-2106
Luxe Gold Cardstock, HCGP1-488
Wild Aster Cling Stamp Set, HCPC-3887
Wild Aster Spray Cling Stamp Set, HCPC-3888
Wild Aster Scroll & Cluster Cling Stamp Set, HCPC-3889
Paper Pack of 10 - Kraft, HCPP1-438-3
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475

Ranger Archival Ink Pad - Vermillion RACP461
Ranger Archival Ink Pad - Vibrant Fuchsia RACP524
Ranger Archival Ink Pad - Buttercup RACP632
Rajni Chawla's Crystal Clear PGM15015  

Other Products: 
Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, White cardstock, Ranger Distress Ink pads - Barn Door, Peeled Paint, Seedless Preserves,

I hope you like my inspiration
For printable instructions to recreate this project visit Heartfelt Creations blog
Check out newest ideas on Heartfelt Creations Official Facebook Page
and
come back for more

Katarzyna Ewa

304. Winter harbor

Hello everyone!
For this week Heartfelt Creations inspiration I design 6"x 6" winter card
with
Sea Breeze Collection

...............................................
My external disc is in the service right now I very sorry I can't show you tutorial for this wonderful card I still hope we could recover some videos (fingers crossed)
...............................................





Instructions:
Gate fold card measures - 6 inches by 6 inches. Die cut border half circle of 6” x 6” Shutter Fold Card base using Rounded Eyelet Window Die, then repeat the process on the other side of the card base. Cut out 5 7/8” x 5 7/8” piece of Paper Collection and adhere it inside the card base. Cut out 6” x 12” strip of Sea Breeze Paper Collection and adhere it to the both sides of half circles. Remember to cut out the excess pieces from around the half circle using scissors every time you adhere the paper. Adhere the half circle panels together (on both sides) and apply White Glitter paste on the front of the card using a soft brush, then leave card to dry completely. Die cut decorative circle of Paper Collection using Rounded Window Frame Die. Add an additional layer of white card on the back, then apply glue on the left flap of the card base and adhere final piece on the centre of the card front. Die cut 4” circle of Paper Collection using Circle Basics Large Die and adhere it on the centre of decorative circle.
Stamp the landscape image on the white card of Sea Breeze Harbor Cling Stamp Set using Coffee Ranger Archival Ink Pad, then colour it with Ranger Distress Inks: Tumbled Glass, Peeled Paint, Pumice Stone and Black Soot using Blender Marker. Die cut the image with 4” circle using Circle Basics Large Die, then die cut it again with matching die and adhere it to the circle on the front of the card base.
Stamp poinsettia images from Christmas Poinsettia & Holly Cling Stamp set with Cobalt Archival Ink pad and colour them in with Manganese Blue Archival Ink using Daubers. Stamp holly images from Christmas Poinsettia & Holly Cling Stamp set with Peeled Paint Distress Ink pad and colour them with the same ink using Dauber. Die cut poinsettias and holly images with matching die from Christmas Poinsettia & Holly, then place them in 3D Christmas Poinsettia Shaping Mold, spray them with water and run them through die cutting machine. Assemble poinsettia flowers using hot glue gun, add stamens and adhere them to the card base. Fill in composition with holly leaves.
As a final touch, gently apply glitter paste on the scene to create more realistic winter landscape.


Other Products: 
Die Cutting machine, Trimmer or Guillotine, Scissors, White Cardstock, Hot glue gun, Bone folder, White glitter paste, Soft brush, Ranger Distress Inks: Tumbled Glass, Peeled Paint, Pumice Stone, Black Soot; Ranger Archival Ink - Cobalt


I hope you like my inspiration
For printable instructions to recreate this project visit Heartfelt Creations blog
Check out newest ideas on Heartfelt Creations Official Facebook Page
and
come back for more

Katarzyna Ewa

301. New card with Wilderness Retreat Collection + video tutorial

Hello everyone!

For this week Heartfelt Creations inspiration I design A2 card made
with
Wilderness Retreat Collection




Instructions:  
  1. Top fold A2 card measures - 4 1/4” x 5 1/2”. To create card base - fold a piece of Kraft card and using Eyelet Rectangle & Basics Die cut a 4 1/4” x 5 1/2” card base from it. Die cut slightly smaller than the card base, a piece of the Wilderness Retreat paper collection using the Eyelet Rectangle & Basics Die, then adhere decorative stripes from the Paper Collection on the top of it and adhere the final piece to the card front.
------------------------------------------------------------------------------------------------------------- 
A6 size update
  1. Top fold card measures - 4 1/8” x 5 7/8”. To create card base - cut out 4 1/8"x11 3/4" piece of Kraft card and score it at 5 7/8" (long side up). Fold using bone folder along the score lines. Cut out slightly smaller than the card base piece of the Wilderness Retreat paper collection and adhere decorative stripes from the Paper Collection on the top of it, then adhere the final piece to the card front. 
------------------------------------------------------------------------------------------------------------- 
2. Die cut four decorative corners using the Swirly Accent Spray Die from kraft card and adhere them to the card base as shown. Die cut the eyelet frame using the Album Tags and Accents Die from kraft card.
Stamp the landscape image from the Create a 'scape Trout Lake Cling Stamp Set with Jet Black Archival Ink and colour it with Ranger Distress Inks - Tumbled Glass, Peeled Paint, Mowed Lawn and Faded Jeans using daubers. Die cut it with matching die and adhere it to the Paper Collection piece. Adhere the eyelet frame to the top and cut out the excess pieces with scissors, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam.
Stamp the same landscape image from Create a 'scape Trout Lake Cling Stamp Set with Jet Black Archival Ink and die cut it with detailed matching die from Create a 'scape Trout Lake Die and disconnect the pieces with scissors. Colour in stone images with Ranger Distress Inks - Pumice Stone and Black Soot using Blender Marker, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam. Colour in the fish image with Ranger Distress Inks - Scattered Straw and Evergreen Bough using Blender Marker, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam.
Die cut the tag with sentiment from the paper collection using the Album Tags and Accents Die, then add an additional layer of white card on the back, decorate it with a piece of baker’s twine and adhere final piece to the card front using 3D foam.
As a final touch, apply Clear Wink of Stella Glitter Brush to add the little sparkle to the lake surface. 


Other Products: 
Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, Kraft cardstock, 3D foam, ZIG Clear Wink of Stella Glitter Brush Marker, bakers twine, Ranger Distress Ink pads - Tumbled Glass, Peeled Paint, Mowed Lawn, Faded Jeans, Pumice Stone, Black Soot, Scattered Straw, Evergreen Bough

I hope you like my inspiration
For printable instructions to recreate this project visit Heartfelt Creations blog
Check out newest ideas on Heartfelt Creations Official Facebook Page
and
come back for more

Katarzyna Ewa

300. Card with watermill + video tutorial

Hello everyone!
For this week Heartfelt Creations inspiration I design A2 ( 4 1/4"  x 5 1/2") card
with





Instructions:  
Side fold card measures - 4 1/4 x 5 1/2". To create card base - fold a piece of craft card and using Eyelet Rectangle & Basics Die cut a 4 1/4 x 5 1/2" card base from it. Die cut frame using connected rectangles from Hand-Stitched Accents Die, then colour it with Distress Inks - Tumbled Glass, Scattered Straw, Peeled Paint and Mowed Lawn. Using the same connected dies from Hand-Stitched Accents Die die cut four more frames of white card, then stack and adhere them together and adhere coloured frame to the top. Distress the edges of final piece with Peeled Paint Distress Ink and adhere it to the piece of paper collection, then adhere final piece to card base.
Stamp the landscape image of Create a 'scape Wilderness Cling Stamp Set with Jet Black Archival Ink and colour it with Ranger Distress Inks - Tumbled Glass, Peeled Paint, Mowed Lawn, Brushed Corduroy, Broken China, Pumice Stone, Vintage Photo, Black Soot and Evergreen Bough using Blender Marker. Die cut it with matching die, then die cut it with Hand-Stitched Accents Die and adhere it inside the frame on the card front. Stamp the same landscape image of Create a 'scape Wilderness Cling Stamp Set with Jet Black Archival Ink two more times. Die cut them with detailed matching die from Create a 'scape Wilderness Die and disconnect the pieces with scissors. Colour the watermill and tree image with Ranger Distress Inks - Vintage Photo, Pumice Stone, Tumbled Glass, Broken China, Evergreen Bough, Peeled Paint, Mowed Lawn and Brushed Corduroy using Blender Marker, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam. Colour the conifer tree image with Ranger Distress Inks - Peeled Paint, Mowed Lawn, Evergreen Bough and Vintage Photo using Blender Marker, then add an additional layer of white card on the back and adhere final piece on the card front using 3D foam. Colour another tree image with Ranger Distress Inks - Peeled Paint, Mowed Lawn, and Vintage Photo using Blender Marker, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam.
Cut out the grass image and colour it in with Ranger Distress Inks - Peeled Paint and Mowed Lawn using Blender Marker, then die cut it with Hand-Stitched Accents Die. Add an additional layer of white card on the back and adhere final piece inside the frame on the card front. Stamp the grass image of Create a 'scape Trout Lake Cling Stamp set with Jet Black Archival Ink and colour it with Ranger Distress Inks - Peeled Paint and Brushed Corduroy using Blender Marker. Die cut it with matching die, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam.
Stamp the sentiment of Celebrate Love Sentiments Cling Stamp Set with Jet Black Archival Ink and die cut it with Arrows and Banner Die, then distress it with Scattered Straw Distress Ink using daubers. Score the banner to match your dimensional card and add additional piece of white card to the back if necessary. Adhere the final piece to the card front as shown.
As a final touch apply Clear Wink of Stella Glitter Brush to add the little spark to the lake surface.
 


Products Used:
Designer Dries Clear Adhesive, 159723 http://bit.ly/2lQSEnb
Metal Tip for Adhesive Bottles, 352854 http://bit.ly/33nLCaX
Stack and Store Daubers-Pack of 6, HCDA1-449 http://bit.ly/2YOCgRL
Tombow Dual Brush Marker N00 Blender, 282873 http://bit.ly/33NxRC4
Hand-Stitched Accents Die, HCD1-7207 http://bit.ly/2Qi9Hvu
Wilderness Retreat Paper Collection, HCDP1-2108 http://bit.ly/32Qr0pX
Create a 'scape Trout Lake Die, HCD1-7269 http://bit.ly/2Xf6jmt
Create a 'scape Trout Lake Cling Stamp Set, HCPC-3895 http://bit.ly/2Xb7lQC
Create a 'scape Wilderness Die, HCD1-7268 http://bit.ly/2KjRCt8
Create a 'scape Wilderness Cling Stamp Set, HCPC-3894 http://bit.ly/2qTIhBk
Eyelet Rectangle & Basics Die, HCD2-7189 http://bit.ly/35GswOg
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847 http://bit.ly/37kSPua
Ranger Archival Ink Pad - Jet Black, RACP468 http://bit.ly/2WzCwmD

Other Products: 
Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, Craft cardstock, White cardstock, 3D foam, Clear Wink of Stella Glitter Brush, Ranger Distress Ink pads - Tumbled Glass, Scattered Straw, Peeled Paint, Mowed Lawn, Brushed Corduroy, Broken China, Pumice Stone, Vintage Photo, Black Soot, Evergreen Bough

I hope you like my inspiration
For printable instructions to recreate this project visit Heartfelt Creations blog
Check out newest ideas on Heartfelt Creations Official Facebook Page
and
come back for more

Katarzyna Ewa

299. A 'scape card with Wilderness Reatreat Collection + video tutorial

Hello everyone!
For this week Heartfelt Creations inspiration I design 5"x 7" card
with
new Wilderness Reatreat Collection

- polish translation -

Witam Was serdecznie! Cieszę się, że mogę Wam dziś pokazać tutorial na kartkę z nową kolekcją Heartfelt Creations Wilderness Reatreat
Tym razem pokaże Wam krok po kroku jak kolorować z użyciem tuszy Distress i jak połączyć elementy żeby uzyskać przestrzenny efekt.


About new collection:
Leave the busyness of life behind, with an awe-inspiring wilderness retreat! Breathe deeply, enjoy a starry sky, and immerse yourself fully in the tranquility of nature! Enjoy the isolation of a quaint little cabin in the woods, surrounded by statuesque trees, towering mountain views, and a quietly winding river! Enjoy a day trip that begins at the water’s edge! Push off the canoe and paddle your way to becoming one with the great outdoors…perhaps the ducks will share their favorite spot among the reeds, as the trout jump from the water, beckoning you to paddle further upstream! As the dusk begins to settle, listen for the howling coyotes in the distance and enjoy the deer grazing silently in the meadows. By now it’s time to head back to the cabin, lay your head on the pillow and dream about the new adventures tomorrow will bring! Join us as we take time to pause, slow down, and enjoy God’s beautiful creations with the new Wilderness Retreat Collection from Heartfelt Creations! Take a hike through this tranquil paper collection filled with illustrations of glorious wilderness scenes featuring old mills, babbling brooks, mountainside cabins, and a variety of wildlife! Rustic browns, river blues, sunrise yellows, and sunset reds create incredible backdrops for pleasing plaids, stunning stripes, and charming checkered patterns, perfect for all of your masculine themed creations! A wonderful assortment of wilderness themed cling stamp sets, along with coordinating dies, are sure bring all of your outdoor themed paper crafting creations to life, and allow you to create an abundance of different wilderness settings for all of your handmade greeting cards, scrapbook layouts, and memory keeping albums! Create breathtaking views with beautifully detailed illustrations of wilderness cabins, old work mills, fish filled rivers, howling coyotes, and soaring eagles. Create your own escape from reality, with the beauty and tranquility of the Wilderness Retreat Collection! 


Instructions: 

Top fold card measures - 5 inches by 7 1/2 inches. To create 5”x 7” card base, cut a 7” x 10” piece of craft card and score it at 5" (long side up). Fold using a bone folder along the score lines to create top fold card.
Cut out 4 3/4” x 6 3/4” piece of Paper Collection then place frame, created with connected rectangles from Hand-Stitched Accents Die, on the centre and run it through die cutting machine. Line up all of the die cut pieces of Paper Collection on the card front and adhere larger and smaller ones to the card base. Using the same connected dies from Hand-Stitched Accents Die die cut four more frames of white card, then stack and adhere them together and then adhere frame of Paper Collection to the top. Distress the edges of final piece with Peeled Paint Distress Ink and adhere it to the card front.
Stamp the landscape image of Create a 'scape Trout Lake Cling Stamp Set with Jet Black Archival Ink and colour it with Ranger Distress Inks - Peeled Paint, Mowed Lawn using daubers. Die cut it with matching die from Create a 'scape Trout Lake Die then cut a piece with scissors and adhere it to the card base. Stamp the landscape image of Create a 'scape Backcountry Cling Stamp Set with Jet Black Archival Ink and colour it with Ranger Distress Inks - Peeled Paint, Mowed lawn, Vintage Photo using daubers. Die cut it with matching die from Create a 'scape Backcountry Die, then die cut it with Hand-Stitched Accents Die, add additional die cut piece of white card on the back and adhere final piece on the card front with 3D foam. Stamp the same landscape image of Create a 'scape Backcountry Cling Stamp Set with Jet Black Archival Ink two more times. Die cut them with detailed matching die from Create a 'scape Backcountry Die and disconnect the pieces with scissors. Colour the house image with Ranger Distress Inks - Vintage Photo, Brushed Corduroy, Aged Mahogany and Black Soot using Blender Marker, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam. Colour in the tree image with Ranger Distress Inks - Vintage Photo, Peeled Paint and Mowed Lawn using Blender Marker, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam. Colour the stones with canoe image with Ranger Distress Inks - Vintage Photo, Peeled Paint, Mowed Lawn and Black Soot using Blender Marker, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam. Colour the canoe image with Ranger Distress Inks - Brushed Corduroy, Aged Mahogany and Barn Door using Blender Marker, then add an additional layer of white card on the back and adhere final piece to the card front using 3D foam. Stamp the eagle image of Create a 'scape Nature Stamp Set with Jet Black Archival Ink and colour it with Vintage Photo Ranger Distress Ink using daubers, then die cut it with matching die, add an additional layer of white card on the back and adhere final piece to the card front as shown. Stamp flower image Create a 'scape Nature Stamp Set with Jet Black Archival Ink and colour it with Peeled Paint, Mowed Lawn, Barn Door, Scattered Straw using Blender Marker, then die cut it with matching die, add an additional layer of white card on the back and adhere final piece to the card front using 3D foam.
Cut out the sentiment from Paper collection, adhere it to the slightly larger piece of craft cardstock, then adhere final piece to the card front as shown. Stamp the flower images of Floral Fashionista Cling Stamp Set with Monarch Orange Ranger Archival Ink and colour it with Ranger Archival Inks - Buttercup and Monarch Orange using daubers, then die cut them with matching die and shape them using 3D Petite Floral Shaping Mold. Assemble flowers using hot glue gun and adhere them to the card as shown.
For finishing touches, apply Ranger Crystal Ice Stickles Glitter Glue on the flowers and Clear Wink of Stella Glitter Brush to the lake surface.



 

Products Used:
Designer Dries Clear Adhesive, 159723 http://bit.ly/2lQSEnb
Metal Tip for Adhesive Bottles, 352854 http://bit.ly/33nLCaX
Stack and Store Daubers-Pack of 6, HCDA1-449 http://bit.ly/2YOCgRL
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475 http://bit.ly/2LrpC6y
Tombow Dual Brush Marker N00 Blender, 282873 http://bit.ly/33NxRC4
Hand-Stitched Accents Die, HCD1-7207 http://bit.ly/2Qi9Hvu
Floral Fashionista Die, HCD1-7215 http://bit.ly/2Oa8tQs
Create a 'scape Backcountry Die, HCD1-7267 http://bit.ly/352y3xA
Create a 'scape Trout Lake Die, HCD1-7269 http://bit.ly/2Xf6jmt
Create a 'scape Nature Die, HCD1-7270 http://bit.ly/371cBut
Wilderness Retreat Paper Collection, HCDP1-2108 http://bit.ly/32Qr0pX
3D Petite Florals Shaping Mold, HCFB1-471 http://bit.ly/2QpJuLL
Floral Fashionista Cling Stamp Set, HCPC-3855 http://bit.ly/2Oa6zzb
Create a 'scape Backcountry Cling Stamp Set, HCPC-3893 http://bit.ly/376FlCj
Create a 'scape Trout Lake Cling Stamp Set, HCPC-3895 http://bit.ly/2Xb7lQC
Create a 'scape Nature Cling Stamp Set, HCPC-3896 http://bit.ly/2XcY6za
Bright Pearl Stamens-Small, HCS1-458-1 http://bit.ly/2ljIzyC
Deluxe Flower Shaping Kit, HCST1-401http://bit.ly/2mVJXc1

Other Products:

Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, Craft cardstock, White Cardstock, Ranger Crystal Ice Stickles Glitter Glue, Clear Wink of Stella Glitter Brush, Ranger Distress Ink pads - Peeled Paint, Mowed Lawn, Vintage Photo, Brushed Corduroy, Aged Mahogany, Black Soot, Barn Door, Scattered Straw, Pine Needles


I hope you like my inspiration
For printable instructions to recreate this project visit Heartfelt Creations blog
Check out newest ideas on Heartfelt Creations Official Facebook Page
and
come back for more

Katarzyna Ewa